水斗非定常自由水膜流三维贴体数值模拟

本研究采用水斗三维非正交贴体坐标系进行了非定常自由水膜流动的数值解析。对不规则水斗内表面采用三维非正交贴体坐标系下离散点进行拟合,推导了曲面离散点的法向矢量和曲面微元面高斯曲率、平均曲率等几何特征量的计算公式,进而导出流体粒子在运动方向上曲率计算式。在水斗三维贴体坐标系中,还推导了流体粒子在水斗曲面上的运动控制方程。最后对某水轮机水斗内表面非定常自由水膜流进行了数值模拟,得到其非定常水膜流态分布。     

AGE method simulations of a turbulent far‐wake compared to spectral DNS

Turbulent flow simulation methods based on finite differences are attractive for their simplicity, flexibility and efficiency, but not always for accuracy or stability. This paper demonstrates that a good compromise is possible with the advected grid explicit (AGE) method. Starting from the same initial field as a previous spectral DNS, AGE method simulations of a planar turbulent wake were carried out as DNS, and then at three levels of reduced resolution. The latter cases were in a sense large‐eddy simulations (LES), although no specific sub‐grid‐scale model was used. Results for the two DNS methods, including variances and power spectra, were very similar, but the AGE simulation required much less computational effort. Small‐scale information was lost in the reduced resolution runs, but large‐scale mean and instantaneous properties were reproduced quite well, with further large reductions in computational effort. Quality of results becomes more sensitive to the value chosen for one of the AGE method parameters as resolution is reduced, from which it is inferred that the numerical stability procedure controlled by the parameter is acting in part as a sub‐grid‐scale model. Copyright © 2002 John Wiley & Sons, Ltd.     

Simulation of the Action of a Permeable Barrier on an Ideal Incompressible Channel Flow

Plane ideal incompressible flow in a rectangular channel partitioned by a thin permeable barrier (lattice) is considered. In flowing through the lattice the stream suddenly (jumpwise) changes direction and loses energy. The flow is assumed to be vortical; the vorticity is discontinuous on the lattice. A mathematical formulation of the problem for the stream function is proposed in the form of a nonlinear elliptic equation with coefficients discontinuous on the lattice line. A numerical solution is constructed using the finite-element iteration method. The results of the numerical simulation show how the flow velocity profile in the channel can be controlled by means of permeable barriers.     

Convergent Flows of Molten Polymers Modeled by Generalized Second-Grade Fluids of Power-Law Type

The molding processes of polymer melts involve geometrically complex dies. Such dies are usually tapered or streamlined to achieve a maximum output rate under conditions of laminar flow. The model of a generalized second-grade fluid of power-law type is used and the results obtained are illustrated by examples of convergent flows in conical and wedge-shaped dies.     

锥形光纤中光波传输特性的蒙特卡罗模拟

为了分析锥形光纤中光子流的传输特性和空间分布特性，采用了蒙特卡罗算法对其进行了模拟仿真，得到了大量光子经过锥形光纤后的光子分布图.模拟实验结果表明，通过锥形光纤的大量光子集中在探测器中心，到达探测器某一位置的光子数随着该位置到探测器中心距离的增加而减少，并且在锥形光纤锥度比一定的条件下，改变锥形光纤长度，光强度随着长度的增加而下降，但通过锥形光纤的光子分布是一样的.这些研究结果对锥形光纤的设计和实际应用提供了重要依据.     

提高微晶硅薄膜太阳电池效率的研究

采用甚高频等离子体增强化学气相沉积技术制备了系列微晶硅薄膜太阳电池，指出了气体总流量和背反射电极的类型对电池性能参数的影响.电池的I-V测试结果表明：随反应气体总流量的增加，对应电池的短路电流密度、开路电压和填充因子都有很大程度的提高，结果使得电池的光电转换效率得以提高.另外，ZnO/Ag/Al背反射电极能明显提高电池的短路电流密度，进而也提高了电池的光电转换效率.对气体总流量和背反射电极类型影响电池效率的原因进行了分析. 关键词： 微晶硅薄膜太阳电池 气体流量 ZnO/Ag/Al背反射电极     

场协同理论在椭圆型流动中的数值验证

本文用数值模拟的方法，通过四个椭圆型流动传热的例子验证了场协同理论的正确性．结果表明，场协同理论不仅适合于抛物型流动，亦适合于复杂的有回流的椭圆型流动．     

1+1/2对转涡轮叶排轴向间距对性能影响的研究

木文对1+1/2对转涡轮中轴向间距影响进行了初步研究。对不同轴向间距叶栅流场进行了大量时间精确模拟。研究表明,1+1/2对转涡轮高低压转叶间轴向间距成为追求高效率的制约因素,轴向间距为高压转叶喉部宽度是关键点。因此有关小轴向间距下强激波/叶排干扰的研究应该加强。     

叶型优化在非定常流动条件下效果的数值分析

本文对叶型优化在非定常流动条件下的效果进行数值研究。叶型优化基于比较成熟的在定常流动条件下的反问题解法，非定常流动则考虑到动静叶栅之间的相互作用，非定常流动的求解在Ｎ－Ｓ方程的基础上采用分区计算的方法来完成。数值计算的结果表明，定常流动条件下优化得到的叶型在非定常流动条件下同样具有较好的气动性能。     

Development of a Simulation Model for Solid Objects Suspended in a Fluctuating Fluid

We introduce a new scheme for the future application of Real-coded Lattice Gas (RLG) to the numerical simulation of suspended solid objects in a fluctuating fluid environment. The reproduction of Brownian motion for a single solid object is verified through the Gaussian distribution of its displacements. The effectiveness of the solid–solid interaction model is also confirmed in an N-body simulation.